|
POTENTIAL USES FOR LINE-X PRODUCTS
Presented here is a partial list of potential non-confidential uses for LINE-X Products as reported by our customers evaluating this product. The following list is presented to stimulate the thinking of potential users of these unique polymers. No guarantee of suitability in any specific application is implied or intended.
*Fish boat holds
*Hail, bird, traffic protection over polyurethane foam
*Holding pond liners & secondary containment on
geotextile fabric
*Pipelines (for corrosion control)
*Protect foam flotation billets from mechanical and
hydrocarbon damage
*Roof coatings for metal decks
*Sealing manholes from water infiltration
*Tank linings for primary and secondary containment
*To protect concrete sewage manholes from H2S
Abrasion damage control on slip line pipe
Abrasion resistance for street sweepers
Abrasion resistant coatings in dump truck
Aircraft carrier decks, stairs, passageways
Airport fueling valve pits
Ambulance interiors
Anti-Stick for end loader paddles at fly ash handling
facility
Aquaculture & Horticulture ponds
Asbestos & lead encapsulation
Base coat for E.I.F.S.
Bedliners for pickups, trailers, etc.
Bus Stops
Casket encapsulation
Coat fabric surfaces of kayaks and canoes
Coat flex foam insulation for floor cushioning
Coat metal salt and sand spreaders
Coat Roller Conveyor
Coat utility pole butts to prevent termite damage
Coating containment boxes for drilling mud
Coat alternative fuel down chute to prevent sticking
Coat underside of bush planes to prevent rock damage
Coating inside silos for containment of coal cement,
chemicals, silage, etc.
Coating of pipe insulation fittings
Coating trailers for hauling brine soaked hides
Coatings for EPS products
Coatings over Roof shingles
Concrete sanitation process stations
Corrosion protection on Parking Elevator
Custom water fountains
El Sugundo type tank floors
Encapsulate fatigue mats
Encapsulating archeological digs
Encapsulation of hazardous materials containers for burial
Fire water tankers protection of rush and stress cracks
Floating dock coatings
Flooring & walls of dairy barns
Floors and troughs of hydroponic hot houses
Gasketing
Glass Protect from broken glass injuries
Grouting for concrete floors
Highway and bridge overlays
Highway striping
Horse barn and Horse trailer floors
Hot asphalt dump trucks
In lieu of grout for concrete block containment
Increase flow to turbine pumps (penstock)
Interiors of smoke stacks to prevent salt cake buildup
Irrigation ditches, troughs and flumes
Juice and fruit padded bundling
Laminate adhesive for high impact plywood
Line containers for transport of optical grade sand, food,
and medical grade plastics
Line Sluice Boxes
Liners for settling ponds
Lining groundwood pump tanks
Lining of cement mixers, ready mix trucks and chutes
Low cost molds and molded parts
Macro encapsulation of hazardous debris and ruble
Manufacture of composting units
Marine animal training tanks
Membrane and barrier for mine uses
New uses for lining Cable Spools to prevent chaffing of
wire and cable
On geotextile fabric between railroad tracks for
containment of solids and fluids
Pipe coatings for cathodic disbondment protection
Placer mine trough abrasion protection
Potting runway light fixtures on air strips
Preservation of Historical Sandstone Building
Preserving ice sculptures
Preserving sand bags on embankments to prevent washouts
Prevent rust contamination in plastic pellet railcars
Protect icebreaker ship bows
Protect saltwater ballast tanks on ships
Protect steel ice deflectors for bridge columns
Protecting High Voltage boom trucks from electrical
conductivity
Protection of sewage digesters and clarifiers
Protection of surfaces in malt kilns
Radon and Methane Barrier
Reline vibratory deburring machines
Repair and Recoat PVC Sheetliners
Repair railcar hatches
Reset Railroad tie spikes
Retrofit Sealed Rubber Transport Bladders
Roof coatings for monolithic domes
Rust encapsulation on barges ad tanks
Sand and snow dumps
Seal and lock screws, lap seams on metal building roofs
Seal air walls in mining applications
Seal bottom of boathouses
Seal chines on large tanks w/bridging fabric
Seal lumber kiln dryers
Seal rigid insulation in deep sea applications against
hydrostatic pressure
Sealing clean rooms
Sealing controlled atmosphere and nitrogen purged
agricultural buildings
Sealing ship holds before sailing to protect cargo
Sealing unit boxes at HydroCracker
Short Run Molded Parts to save the cost of tooling for
Rotomold and vacuum form
Soil stabilization
Spill containment on geotextile for oil well head house
floors
SportsCourt and Skateboard ramp surfaces
Steam cleanable surface for mushroom growing sheds
Strut protection for hydrofoil watercraft
Swimming pools
Temporary building repair
Theatrical props and movie sets
Tiger Cages
To eliminate electrical conductivity on explosive carriers
To line railcars for protection of product and to prevent
sticking during offloading
To replace FRP racecar body parts
To restore pilings above and below water line
To seal heat brick on steam vessels and pipe in lieu of
lagging
Traction surface for vertical tower training of firefighters
Urine resistance for floors/walls of jail cells
Vehicle undercoating
Water dike, dam repair and waterproofing
Waterslides
*Top ten most common uses of LINE-X PRODUCTS
Disclaimer: The information herein is believed to be reliable, but unknown risks may be present. No warranties, expressed or implied, including patent warranties or warranties of merchantability or fitness for use, are made by LINE-X of Virginia Beach, with respect to products or information set forth herein. Nothing contained herein shall constitute permission or recommendation to practice any invention covered by a patent without a license from the owner of the patent. Accordingly, buyer assumes all risks whatsoever as to the use of these materials and buyers exclusive remedy as to any breach of warranty, negligence or other claim shall be limited to the purchase price of the materials. It is recommended that each user conduct a sufficient investigation to establish the suitability of product application in any particular use. Products may be toxic and require special precautions in handling. For all products, user should obtain detailed information on toxicity, together with proper shipping, handling, and storage procedures. Failure to adhere to any recommended procedures shall relieve LINE-X of all liability with respect to the materials and the use thereof.
|